����(y��ng)VICKERS�͉��^(gu��)�V��DG5V-8-H-6C-T-M-U-H-10
pressure drop and prevents element
collapse and release of retained
contaminants back into hydraulicsystem.
The following sizing recommendations are based on using mineral
oil at 30 mm2/s (cSt) viscosity, maximum housing pressure drop 0,4
Filters are thoroughly multipass tested
(ISO 4572, β ≥ 200) and rated to
achieve cleanliness levels in
accordance with ISO 4406. For

����(y��ng)VICKERS�͉��^(gu��)�V��DG5V-8-H-6C-T-M-U-H-10

assistance in selecting a target
cleanliness level, consult American
National Standard Institute ANSI
(NFPA/JIC) T2.24.1-1991 or your local
Vickers representative
bar (6 psi), maximum clean element pressure drop 0,8 bar (12 psi).
Refer to individual pressure drop curves, pages 13 and 14, to obtain
filter assembly pressure drop information (P Total = P Housing +
The following sizing recommendations are based on
using mineral oil at 30 mm2/s (cSt) viscosity, maximum
housing pressure drop 0,15 bar (2 psi), maximum clean